Home

What are the symptoms of a bad neutral safety switch? - Quora

Standard Motor Products Neutral Safety Switch MC-NSS2

$8.99


you could have a bad neutral safety switch here is a wiring diagram

A no crank condition means that the engine is not cranking when you turn the key to crank the engine. This is usually due to a bad starter motor, bad ignition switch, bad neutral safety switch, or maybe the engine threw a rod and is locked up.

One way to diagnose a bad neutral safety switch is to place the shifter into park or neutral, then try to start the engine while gently wiggling the shifter so that it almost goes out of gear. This will engage a different part of the contact inside your switch, allowing power to go through to the starter relay. If your vehicle only starts while wiggling the shifter, then you need to replace the neutral safety switch.

Can a Bad Neutral Safety Switch Cause a Car to Not Run | Repair 7

  Honda ATV Forum > Honda ATV Technical Discussions > Repair & Maintenance

Diagnosing a Bad Neutral Safety Switch with a Scan Tool

So here's what's going on. It won't start. Won't even turn over (no click, no noise). If I jump the wire on the solenoid, it turns right over, but it won't turn over with the key. Seems like it could be a bad ignition key switch, or more likely bad neutral safety switch. The thing is, I can't find the darn thing.

One way to diagnose a bad neutral safety switch is to place the shifter into park or neutral, then try to start the engine while gently wiggling the shifter so that it almost goes out of gear. This will engage a different part of the contact inside your switch, allowing power to go through to the starter relay. If your vehicle only starts while wiggling the shifter, then you need to replace the neutral safety switch.